If you are looking for a simple and effective way to find out problems that yourvehicle is experiencing all the time, then why not get your very own OBD scanner or code reader.
For those who are unfamiliar, an OBD scanner is a device that helps you perform a diagnostic evaluation on your vehicle. It can go ahead and identify any possible problem that contributes to consistent car or engine trouble. OBD stands for on-board diagnostic and they are helpful in several ways to every car owner out there.
There are a variety of OBD scanner models that are available today. However, the two most common ones usually sit on opposite sides of the pole. Some of the more expensive OBD scanners out there contain plenty of features and can actually provide error codes for both OBD I and OBD II vehicles. However, the cheaper ones are limited in their scope of error codes.
The Actron CP9135 AutoScanner features a large, easy-to-read LCD screen that displays the definition of the trouble code. acsifsenegal For ODB II compliant (1996 and later) vehicles, the Actron CP9135 AutoScanner provides trouble code data, then erases trouble code and turns the Check Engine light off. Although you may still have to fix the problem, the scanner turns off the “Check Engine” warning light on your vehicle’s dash so you will not be distracted while you resume your drive.
The Actron CP9135 AutoScanner is simple and easy even for a non-professional to use. The attached cable with OBD II 16-pin connector provides connections for both power and data, while the eight-foot cars-scanner cable and the rugged housing are both oil-resistant and grease-resistant for added durability. The long cord that connects to the computer facilitates ease of use in tight spaces. Once connected, just press the “READ” key and the very user friendly menu displays a variety of information in a snap. Use the Monitor Status and Inspection / Maintenance (I/M) Readiness function to ascertain your vehicle’s chances of passing an emissions inspection. The I/M Readiness is a pragmatic function to use just before having your vehicle tested for compliance to the standards of a state emissions program.
One very important thing to take note of is cars-scanner that all emission testing facilities will not pass any vehicle that has an illuminated “Check Engine” light at the time of the inspection – even if the light is only lit to remind you of an over-due oil change or a 60,000-mile tune-up. Using the Actron CP9135 AutoScanner, you can turn off the check engine light and clear getsugarbalance the emissions test without any unnecessary hassle. The menu also reminds you of any pending DTCs and reads the status of the Malfunction Indicator Lamp. By reading the Malfunction Indicator Lamp status the scanner gives some insight into what might cause your Check Engine light to turn on in the near future. In this way, the Actron CP9135 scanner is also able to provide some preventive measures to help a non-professional user to monitor a vehicle’s on board systems.
OBD scanners or readers will help provide updated information about the status of your vehicle. It will also help prevent any engine problems that could happen in the future since it will notify the owner that there is trouble.
The codes that show up on the scanner are normally alphanumeric. Each of the codes will have a corresponding definition according to the type of problem that your car is experiencing. In order for you to identify the cause of the trouble, you can either search online for the code interpretation or simply ask somebody who knows what the definition is. However, some of the more updated scanners also combine a definition for the codes already so you won’t have to waste too much time trying to figure it out.
OBD II scanners are great at identifying your car’s problems. Moreover, it is easy to use and set up. Most of the time, these scanners or readers attach easily to a system in your car. These outlets are mandated by law so chances are, your car will have them. Of course, depending on the model that you have, you would be able to use the scanner in almost every type of vehicle.
However, there are times when you would need to look for the right type of scanner so that it will work without any problems on your type of car or vehicle. Having an OBD scanner is definitely something that you can enjoy as a driver.